|
|
|
|
* TREADMILL TROUBLESHOOTING *
Page: 1 [2] 3
|
|
D. Belt Centering:
- Track treadmill according to instructions in your manual or the
follow the (click here for) Directions on our web site.
- Check belt for seam separation or stretching by inspecting the underside
of the belt. The seam should be even across the width of the belt.
- Check floor to make sure floor is level then check treadmill to make sure
the treadmill is level. Adjust as needed.
- Make sure front roller is set parallel with the rear roller (if front roller
is adjustable).
|
E. Belt Slipping:
- Possible loose walking belt.
- Possible loose motor drive belt.
- Plastic pulley may have come loose on front of roller.
- Walking belt may have stretched or the seam may be coming apart. You
can check this by making sure the belt seam is even on the underside.
- Walking belt may need lubrication
- Walking belt may be worn out, or deck is worn.
- Motor drive belt may be worn out.
|
F. Incline/Lift/Elevation not working:
- If you know your getting power to unit, check to see if console up/down
incline keys/pads are functioning.
- Ribbon cable may be out of place or pinched.
- Elevation motor is getting voltage, but still not working. This may
warrant a new elevation motor.
|
|
|
|
|
